Filter
Top Products
Checking the Configuration
PA-T3 Serial Port Adapter Installation and Configuration
8-16
The following example of the show interfaces type slot/port command shows all of the information
specific to the serial PA-T3 port (interface port 0) in port adapter slot 2:
router# show interfaces serial 2/0
Serial2/0 is up, line protocol is up
Hardware is M1T-T3 pa
MTU 4470 bytes, BW 44210 Kbit, DLY 200 usec, rely 255/255, load 1/255
Encapsulation HDLC, loopback not set, keepalive not set
Last input 00:00:01, output 00:00:03, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0 (size/max/drops); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/64/0 (size/threshold/drops)
Conversations 0/1 (active/max active)
Reserved Conversations 0/0 (allocated/max allocated)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
18958 packets input, 4172738 bytes, 0 no buffer
Received 5073 broadcasts, 0 runts, 0 giants
0 parity
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
18294 packets output, 4552579 bytes, 0 underruns
0 output errors, 0 applique, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
1 carrier transitions
rxLOS inactive, rxLOF inactive, rxAIS inactive
txAIS inactive, rxRAI inactive, txRAI inactive
router#
For a VIP2, the show interfaces type slot/port-adapter/port command displays status information
(including the physical slot and port address) for the interfaces you specify. In this example, a
one-port PA-T3 serial port adapter-configured VIP2 is in chassis slot 10, in port adapter slot 0.
router# show interfaces serial 10/0/0
Serial10/0/0 is up, line protocol is up
Hardware is cyBus PODS3 Serial
MTU 4470 bytes, BW 44210 Kbit, DLY 200 usec, rely 255/255, load 1/255
Encapsulation HDLC, loopback not set, keepalive not set
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 0/75, 0 drops
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
14771 packets input, 3032919 bytes, 0 no buffer
Received 2664 broadcasts, 0 runts, 0 giants
0 parity
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
15775 packets output, 2808513 bytes, 0 underruns
0 output errors, 0 applique, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
1 carrier transitions
rxLOS inactive, rxLOF inactive, rxAIS inactive
txAIS inactive, rxRAI inactive, txRAI inactive
router#