2-13
Cisco 806 Router and SOHO 71 Router Hardware Installation Guide
78-10432-04
Chapter 2 Installation
Mounting Your Router
Mounting Your Router
You can mount your router on one of the following surfaces:
• Table or other horizontal surface
• Wall or other vertical surface
Table 2-3 Verifying Operation
Power/Link LEDs to Check Normal Patterns
Power OK On
To hub, server, PC,
or workstation
connected to
ETHERNET port 4
COMPUTERS 4,
COMPUTERS RXD, and
COMPUTERS TXD
• COMPUTERS 4 is on when the Ethernet port
is physically connected to a hub, PC, or
workstation.
• COMPUTERS RXD blinks when an Ethernet
port receives an Ethernet packet.
• COMPUTERS TXD blinks when an Ethernet
port sends an Ethernet packet.
To servers, PCs, or
workstations
connected to
ETHERNET port 1,
2, or 3
COMPUTERS 1, 2, or 3,
COMPUTERS RXD, and
COMPUTERS TXD
• COMPUTERS 1, 2, or 3 is on when the
Ethernet port is physically connected to a
server, PC, or workstation.
• COMPUTERS RXD blinks when an Ethernet
port receives an Ethernet packet.
• COMPUTERS TXD blinks when an Ethernet
port sends an Ethernet packet.
To broadband
modem or Ethernet
switch
INTERNET 1, INTERNET
RXD, AND INTERNET
TXD
• INTERNET 1 is on when the INTERNET
ETHERNET port is physically connected to
a broadband modem or Ethernet switch.
• INTERNET RXD blinks when the
INTERNET ETHERNET port receives an
Ethernet packet.
• INTERNET TXD blinks when the
INTERNET ETHERNET port sends an
Ethernet packet.