Filter
Top Products
Clock Commands
sntp unicast client enable
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 114
6
Example
The following example enables the SNTP client on Ethernet port e3.
Console(config)# interface ethernet e3
Console(config-if)# sntp client enable
sntp unicast client enable
The sntp unicast client enable Global Configuration mode command enables the
device to use the Simple Network Time Protocol (SNTP) to request and accept
SNTP traffic from servers. Use the no form of this command to disable requesting
and accepting SNTP traffic from servers.
Syntax
sntp unicast client enable
no sntp unicast client enable
Default Configuration
The SNTP Unicast client is disabled.
Command Mode
Global Configuration mode
User Guidelines
Use the sntp server Global Configuration mode command to define SNTP servers.
Example
The following example enables the device to use the Simple Network Time
Protocol (SNTP) to request and accept SNTP traffic from servers.
Console(config)# sntp unicast client enable