Filter
Top Products
IGMP Snooping Commands
show ip igmp snooping groups
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 204
14
Parameters
•
vlan-id —
Specifies the VLAN number
•
ip-multicast-address
— Specifies the IP Multicast address
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
To see the full Multicast Address Table (including static addresses) use the show
bridge multicast address-table Privileged EXEC command.
Example
The following example shows IGMP snooping information on Multicast groups.
Console# show ip igmp snooping groups
Vlan Group Source Include
Address Address Ports
1 231.2.2.3 172.16.1.1 e1
1 231.2.2.3 172.16.1.2 e2
19 231.2.2.8 172.16.1.1 e9
19 231.2.2.8 172.16.1.2 e10-e11
IGMP Reporters that are forbidden statically:
Vlan Group Address Source address Ports
---- ------------- -------------- --------
1 231.2.2.3 172.16.1.1 e8
19 231.2.2.8 172.16.1.1 e8