Filter
Top Products
QoS Commands
qos aggregate-policer
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 281
23
Default Configuration
This command has no default configuration.
Command Mode
Policy-map Class Configuration mode
User Guidelines
Policing uses a token bucket algorithm. CIR represents the speed with which the
token is removed from the bucket. CBS represents the depth of the bucket.
Example
The following example defines a policer for classified traffic. When the traffic rate
exceeds 124,000 bps or the normal burst size exceeds 96000 bps, the packet is
dropped. The class is called ‘class1’ and is in a policy map called ‘policy1’.
Console (config)# policy-map policy1
Console (config-pmap)# class class1
Console (config-pmap-c)# police 124000 9600 exceed-action drop
qos aggregate-policer
The qos aggregate-policer Global Configuration mode command defines the
policer parameters that can be applied to multiple traffic classes within the same
policy map. Use the no form of this command to remove an existing aggregate
policer.
Syntax
qos aggregate-policer
aggregate-policer-name committed-rate-bps excess-
burst-byte
exceed-action {drop | policed-dscp-transmit} [dscp
dscp
]
no qos aggregate-policer