Filter
Top Products
19
Chapter 5: Setting up the Wireless-G ADSL Gateway with SpeedBooster
Using the Setup Wizard
Wireless-G ADSL Gateway with SpeedBooster
15. There are two ways to configure the Gateway’s wireless settings, SecureEasySetup and manual
configuration.
If you have other SecureEasySetup devices, such as notebook adapters or printers, then you can use the
Gateway’s SecureEasySetup feature to create your wireless network. Proceed to the section, “Using the
Gateway’s SecureEasySetup Feature.”
If you do not have other SecureEasySetup devices, if you would like to enter the wireless and security settings
yourself, or if you prefer not to use the security that is automatically set for you with SecureEasySetup, then
proceed to the section, “Manually Configuring the Gateway’s Wireless Settings.”
Figure 5-17: Setup Wizard’s Configure Wireless
Settings Screen
NOTE: SecureEasySetup ONLY uses WPA-Personal security. If your current wireless devices do
not support WPA-Personal security OR you want to use WPA2 security, then you cannot use
SecureEasySetup on your network. You will need to manually configure the security settings for
your wireless network.