Filter
Top Products
4
Chapter 2: Getting to Know the Wireless-B Media Adapter and Its Remote Controller
Front Panel
Wireless-B Media Adapter
Chapter 2: Getting to Know the Wireless-B Media Adapter and
Its Remote Controller
Front Panel
On the Adapter’s front panel, it has three LEDs to let you know how the Adapter is functioning. There is also a
Power button. See Figure 2-1.
Ready Green. The Ready LED flashes when the Adapter is establishing a connection to the host
computer. It stops flashing and stays lit when the Adapter is connected to the host computer.
Wireless Green. The Wireless LED lights up when there is a connection to a wireless network. It flashes
when data is transmitted to or received from the wireless network.
Ethernet Green. The Ethernet LED lights up when there is a connection to a wired network. It flashes
when data is transmitted to or received from the wired network.
(Power) The Power button allows you to power on and off the Adapter.
Back Panel
On the Adapter’s back panel, it features seven ports and two buttons, Uplink and Reset. (See Figure 2-2.)
Power The Power port is where you will connect the power adapter.
Figure 2-1: Front Panel
Figure 2-2: Back Panel
Ethernet: an IEEE standard network protocol
that specifies how data is placed on and
retrieved from a common transmission.