Filter
Top Products
CBM-270 User’s Manual
CITIZEN
87
[Caution] If the N5 counter start value is beyond the counter range specified with N1 and
N2, it is assumed to be N1 = N5. If each value of N1 through N5 contains a
character code other than "0" through "9" , the printer will invalidate the data up
to that parameter and handle the subsequent data as normal print data.
[Default] N1 = 1
N2 = 65535
N3 = 1
N4 = 1
N5 = 1
[See Also] GS C0, GS C1, GS C2, GS c
[Sample Program]
LPRINT CHR$ (&H1D) ; "C0" ; * CNT
LPRINT CHR$ (3) ; CHR$ (0) ; FOR I=1 TO 6
LPRINT CHR$ (&H1D) ; "C" ; LPRINT CHR$ (&H1D) ; "c" ;
LPRINT "50 ; 0 ; 5 ; 2 ; 50 ; " ; NEXT I
GOSUB * CNT LPRINT CHR$ (&HA) ;
LPRINT CHR$ (&H1D) ; "C ; " ; RETURN
LPRINT "50 ; 0 ; 5 ; 2 ; 5 ; " ;
GOSUB * CNT
END
[Print Result] When setting a count-down range = 0 to 50, step
value = 5, repeat count = 2, and start value = 50
to print a counter value.
When setting a count-down range = 0 to 50, step
value = 5, repeat count = 2, and start value = 5 to
print a counter value.
GS c
[Function] Printing the counter
[Code] <1D>H<63>H
[Outline] This command prints the serial number counter data. After setting the current
counter value in the print buffer as the print data (Character string), it
increments or decrements the counter according to the set count mode.
[Caution] When setting the value in the print buffer, its format depends on the GS C0
command. The count mode depends on the GS C1 or GS C; command. If the
counter final value set with these commands if exceeded by executing the GS c
command, the counter will be initialized to the set default.
[See Also] GS C0, GS C1, GS C2, GS C ;
[Sample Program] [Print Result]
See the sample programs and print results for the commands on Pages 82
through 85.