Filter
Top Products
—39—
The situation during various errors is shown below.
The LCD’s top line is the type of error, the bottom line is the remedy. Scroll
through messages that are longer than 16 characters.
Notes:
*1: LED may light while macro is executing.
*2: Buzzer sounds when MSW5-1 (buzzer setting) is set to ON.
Status Message LED Backlight Buzzer
*2
Paper near-end PAPER LOW Orange — —
Paper-end Paper end
Please replace paper roll.
Red Red Yes
Front cover open Front cover open
Please close front cover.
Red — Yes
Paper cover open Paper cover open
Please close paper cover.
Red — Yes
Cutter locked Cutter lock
Open paper cover & remove jam.
Red Red Yes
Cutter lock
Then close paper cover
Red Red Yes
Black mark error Black mark error
Please check paper
Red Red Yes
Print head hot Head overheat
Please wait, will continue
Orange — —
Memory error Memory Error Red Red Yes
Print head error Head Error
Please contact your dealer
Red Red Yes
Motor error Motor Error
Please contact your dealer
Red Red Yes
Low-voltage error L Voltage Error
Please contact your dealer
Red Red Yes
High-voltage error H Voltage Error
Please contact your dealer
Red Red Yes
Cash drawer voltage
error
Drawer Error
Please contact your dealer
Red Red Yes
Waiting for macro to
execute
*1
————
FEED