Filter
Top Products
To print the statistics, press the key. Once the
data has been printed out, the statistics memory will be
Cleared.
Configuring the Data Printer for Statistical Evaluation
Any of the following statistical values can be configured in
the “Statistics Applications” menu so that it will be printed
or not printed:
– Number of weighing operations n (-s3- )
– Mean value x¯ (-s4- )
– Standard deviation s (
-s5- )
– Variation coefficient s
rel
(-s6- )
– Sum of the individual values/weights
Σx (-s7- )
– Minimum value/weight min (-s8- )
– Maximum value/weight max (-s9- )
–
–
Difference between the minimum
and the maximum value/weight diff (Date
Set this to 1 if date is required at the
end of statistics readings
-s 10)
Statistical Evaluation of the Data
The printer’s built-in statistics program can process all
values that are computed or weighed and transferred from
an on-line weighing instrument.
The number of values read into the statistics memory is also
displayed.
Printing the Data of the
Connected Weighing Instrument
$ If necessary, print required blank lines (line feed):
Press the key several times,
$ To print the date and time, press the key
> The printout will be as shown on the left
§ To print data, press the key
$ To reset the numbering function, if necessary, press the
key
$ To turn off the numbering function, press the key
123456789012345678901234
12-AUG-2008 10:25:38
123456789012345678901234
01: + 123.4 g
4 5
Numbering Each Value
All individual values printed will be numbered if you set
the “Statistics Applications” menu as follows:
– Numbering function = 1 (
-p4-)
(Factory setting = 1)
The symbol shown on the top right side will be displayed
You can deactivate the numbering function during
subsequent operation of the printer by pressing the
key
This is a very convenient feature for the statistical
evaluation of a series of weights, as you can consecutively
place your samples on the weighing pan without having
to remove them.
n
x
srel
Sx
s
min
max
diff
date
(s3)
(s4)
(s5)
(s6)
(s7)
(s8)
(s9)
(s10)
(s11)
PRINT