Filter
Top Products
6 7
Data Transfer and Statistical Evaluation
in the Manual Mode
Required Printer Configuration
You must set the following printer configuration
in the “Statistics Applications” menu:
– Data transfer manual = 0 (-p5-).
Recording and Evaluating Data
§ Press the key to clear the printer memory prior
to initial data transfer
> Any previous values remaining will be evaluated first,
then you will obtain a printout of the statistics.
The statistics will be deleted.
§ Place the first sample on the weighing pan
§ Print should come from Weighing Scale
> The value will be printed, if the printer has been
configured accordingly
> The count of the transferred values will be displayed
§ Remove the sample from the weighing pan
§ Place the next sample on the weighing pan and
press print button key.
123456789012345678901234
01: + 123.6 g
02: + 117.8 g
03: + 119.1 g
Recording and Evaluating Data
§ Press the key to clear the statistics memory prior to
initial data transfer
> The value will be printed out
123456789012345678901234
01: + 123.6 g
02: + 117.8 g
03: + 119.1 g
§ To record consecutive weighing operations, follow the
steps mentioned above. Then:
§ Press the key to obtain a printout of the statistics
> The values, as shown on the left, are automatically
computed and printed out
> Once the data has been printed out, the statistics memory
will be cleared
123456789012345678901234
n 12
x 99.8 g
s 3.55 g
srel 3.57 %
x 1203.4 g
min 96.0 g
max 103.2 g
Diff 7.2 g
12-AUG-2008 16:02:11