Filter
Top Products
CBM-290/291 User’s Manual
10
CITIZEN
3.4 Paper feeding
With the LF switch pressed once, paper is fed by one line. Paper is fed while it is continuously pressed.
Do not pull paper forcibly to feed paper. Use the LF switch. While the front cover is open or printer mechanism
is pulled down, paper can be fed. But, do not do this often. This may cause a paper jam, etc.
3.5 Auto paper loading function
This printer equips a function to feed the paper automatically when a new paper for replacement is inserted into
paper inlet of printer mechanism.
This printer feeds paper automatically when the printer detects the paper in paper inlet.
3.6 Setting roll paper
1. Open the front cover.
2. Cut the edge of paper at a right or bent angle as the following drawing.
Insert the edge of paper into the paper inlet of the printer mechanism.
When paper is inserted into paper inlet in printer mechanism, paper is loaded automatically.
3. Make sure paper winding direction.
4. After setting paper, set roll paper inside of main unit.
5. Eliminating slack on the printing paper and close the front panel.
6. Feed paper by pressing Feed switch, if necessary.
∗ Factory setting is Head up position.
Make sure to pull head up lever forward to pull down printer mechanism, Because auto paper feed can not
be carried out at had up condition.
∗ When any print data is remaining us print buffer, printer stars printing automatically after loading paper.