Filter
Top Products
CBM-290/291 User’s Manual
35
CITIZEN
(28) Specifying Absolute Positions (ESC $ n1 n2)
Code : [1B]h + [24]h + n1 + n2
*{0≤ n1 ≤ FF}
{0 ≤ n2 ≤ 1} Data is described in Hex code.
The printing start position is specified in the number of dots from the beginning of line. (1/20 inch unit)
• The number of dots is divided by 256, whose quotient is taken as n2 and the residual as n1.
Therefore, the printing start position is equal to n1 + n2 x 256 from the beginning of line..
• Specifying beyond the line end is ignored.
• In case underline is specified, no underline is provided to the skipped portion.
(29) Specifying Relative Positions (ESC ¥ n1 n2)
Code : [1B]h + [5C]h + n1 + n2
*{0≤ n1 ≤ FF}
{0 ≤ n2 ≤ FF} Data is described in Hex code.
The printing start position is specified in the number of dots from the current position.
• Rightward direction is taken as plus and leftward direction as minus.
• To specify N dot in minus (left) direction, use a complement of N for assignment.
- N dots = 65536 - N
• The number of dots is divided by 256, whose quotient is taken as n2 and the residual as n1.
• Specifying exceeding the end of line is ignored.
• In case underline is specified, no underline is provided to the skipped portion.
(30) Bar Code Printing (GS k n Dn NUL)
Code : [1D]h + [6B]h + n + Dn + [00]h
*{0≤ n ≤ 7} Data are described in Hex code.
Specifying a type of bar code and printing bar codes.
• The beginning of line is considered as the next printing start position.
• Depending on the value of n, the following bar code can be selected.
• Dn indicates a character code to be printed.
n (Hex) Bar Code System Maximum Columns
0 UPC-A ---
1 UPC-E ---
2 JAN13 (EAN) ---
3 JAN 8 (EAN) ---
4 CODE 39 14
5ITF 24
6 CODABAR (NW-7) 18
7 CODE 128 15