Filter
Top Products
CBM-270 User’s Manual
[Range] 0 ≤ n ≤ 255
[Outline] The line feed rate per line is specified by n/360 inch.
Since an actual mechanical pitch is 1/203 inch, it is internally converted approximate to the
value specified with this command.
[Default] •The initial value is n = 60 (1/6 inch) (18H), being 4.23 mm line feed rate.
[Sample Program] [Print Results]
See Sample Program and Print Results for ESC 2 on Page 54.
ESC = n
[Function] Data input control
[Code] <1B> H <3D> H <n>
[Range] 0 ≤ n ≤ 255
[Outline] Selecting equipment in which data input from the host is effective.
• Each bit of n indicates as follows:
Value
Bit Equipment
0 1
0 Printer Invalid Valid
1 Not defined
2 Not defined
3 Not defined
4 Not defined
5 Not defined
6 Not defined
7 Not defined
• When the printer has not been selected, this printer abandons all the received data until it
is selected by this command.
[Caution] • Even when the printer has not been selected, it can become BUSY state through printer
operation.
• When the printer is deselected, this printer discards all the data until it is selected with this
command.
[Default] n = 1
[Sample Program] [Print Results]
LPRINT "AAAAA" ;
LPRINT CHR$ (&H1B) ; "=" ; CHR$ (0) ;
LPRINT "aaaaa" ; CHR$ (&HA) ;
LPRINT CHR$ (&H1B) ; "=" ; CHR$ (1) ;
LPRINT "AAAAA" ; CHR$ (&HA) ;