Filter
Top Products
iDP-3210 User’s Manual
CITIZEN
30
Details of error
Cover open : When printer cover is opened, printer cover open sensor detects the cover
opening and has ERROR LED illuminate, then stops printing operation.
But, depending on dip switch setting, paper feed can be performed when printer cover
is opened.
Print Head overheat : To protect print head from excessive heat, in case the temperature of print head
goes high(approx. 65°C or over), head temperature sensor works and has ERROR
LED illuminate, then stops printing operation.
After head temperature is cooled (Approx. 60°C or less), printing operation
automatically starts.
Paper near end : When the remaining of roll paper goes scarce, paper near end sensor located on the side
of roller portion of the upper cover works,
and has ERROR LED illuminate to show the remaining of roll paper is getting scarce.
(See “setting of paper end detector effective for outputting a signal for no paper”
and “setting of paper end sensor effective for print stop” in the chapter of print control
function.)
Paper end : When the roll paper runs out completely, the paper sensor located in the paper course
near to print head detects the end of print paper and has ERROR LED illuminate, then
stops printing operation.
(See “setting of paper end sensor effective for outputting a signal for no paper” and
“setting of paper end sensor effective for print stop” in the chapter of print control
function.)
When the paper is inserted into the paper course near to print head, roll paper is
automatically loaded.
Cutter motor lock : In case that cutter position sensor locates in the auto cutter unit keeps ON or OFF for
one second or more during the operation of cutter motor, this sensor detects it
as motor lock state.
And then, this stops cutter operation and printing operation.
(See the chapter of 4.5 “cancellation of cuter lock”)
(3) FEED Switch
With this pressed once shortly, paper is fed by one line. With this kept pressed, lines
are fed continuously. In case of macro execution wait, this is executed by pressing FEED switch.
(4) FEED Switch and Power Switch
By turning ON power switch with pressing FEED SWITCH, , self printing is performed.