Filter
Top Products
iDP-3210 User’s Manual
CITIZEN
32
5.2 Dip Switch Setting
DS1 FUNCTION ON OFF FACTORY SETTING
-1 Paper cutter Enabled Disabled ON
-2 Cover open Disabled Enabled OFF
-3 CR switching LF activate Ignored OFF
-4 Unused OFF
-5 Print columns 44 columns 42 columns ON
-6 International Characters OFF
-7 International Characters See the table below. OFF
-8 International Characters OFF
-9 Print density OFF
-10 Print density
See the table below
ON
DS2 FUNCTION ON OFF FACTORY SETTING
-1 Bit length 7 bits 8 bits OFF
-2 Parity Provided Not provided OFF
-3 Odd/even Even Odd OFF
-4 DTR/XON-XOFF XON-XOFF DTR/DSR OFF
-5 BAUD RATE OFF
-6 BAUD RATE ON
-7 BAUD RATE See the table below. ON
-8 Unused ------------------ OFF
(Note) DS2 is available only for serial interface.
PRINT DENSITY LIGHT STANDARD DARK DARKER
DS1-9 OFF ON OFF ON
DS1-10 OFF OFF ON ON
DS1-6 OFF ON OFF ON OFF ON OFF ON
DS1-6 OFF ON OFF ON OFF ON OFF ON
-7 OFF OFF ON ON OFF OFF ON ON
-8 OFF OFF OFF OFF ON ON ON ON
BAUD RATE 150 300 600 1200 2400 4800 9600 19200
DS2-5 OFF ON OFF ON OFF ON OFF ON
-6 OFF OFF ON ON OFF OFF ON ON
-7 OFF OFF OFF OFF ON ON ON ON
INTERNATI
ONAL
U.S.A.
FRANCE
GERMANY
U.K.
DENMARK 1
SWEDEN
ITALY
JAPAN