Filter
Top Products
iDP-3210 User’s Manual
CITIZEN
58
(32) Selecting Printing Position of HRI Characters (GS H n)
Code : [1d]H + [48]H + N
* {0 ≤ n ≤ 3} Data is described in Hex code.
Selecting printing position of HRI characters for printing bar codes.
l "n" means the followings.
n (Hex) Printing Position
0 No printing
1 Above the bar code
2 Below the bar code
3 Both above and below the bar code
l The initial value of n is "0".
(33) Defining Download Bit Image (GS * n1 n2 Dn)
Code : [1D]h + [2A]h + n1 + n2 Dn
* {1 ≤ n1 ≤ FF}
{1 ≤ n2 ≤ 48}
{n1 x n2 ≤ 1311} Data is described in Hex code.
Defines downloading bit images of the number of dots specified by n1/n2.
l The numbers of dots are n1 x 8 in horizontal direction and n2 x 8 in vertical direction.
l Dn indicates bit image data.
l The download bit image thus defined remains effective until redefinition, ESC @
execution, ESC &, or power OFF takes place.
l A download character and a download bit image cannot be defined simultaneously.
With this command executed, defined content of a download character is cleared.
l Relations between the bit image data and the dot defined are shown below:
(34) Printing Download Bit Image (GS / m)
Code : [1D]h + [2F]h + m
* {0 ≤ m ≤ 3} Data is described in Hex code.
Prints download bit images in a mode specified by m.
l Modes can be selected by m are shown table for selection with m are shown below.
m MODE NAME DOT DENSITY IN
VERTICAL DIRECTION
DOT DENSITY IN
HORIZONTAL DIRECTION
0 Normal mode 156 DPI 154 DPI
1 Double wide mode 156 DPI 77 DPI
2 double high mode 78 DPI 154 DPI
3 Double wide/double high mode 78 DPI 77 DPI
l When data exist inside the print buffer, this command is ignored.
l When a download bit image has not been defined, this command is ignored.
l A portion of a download bit image exceeding one line length is not printed.
l A download character and a download bit image cannot be defined simultaneously.