Filter
Top Products
24
Firmware Upgrade
1. Select the Firmware Upgrade tab.
2. Click the Select Firmware File button.
3. Select the appropriate Firmware le and click Ok.
4. Click the Update Firmware button.
Script Editor
Use the Script Editor in CognitiveTPG Printer Administrator to send programming
language code to the printer. The EZ-LP printer will not print CPL label formats
but will recognize CPL based printer setting commands. For more information
on programming CPL please refer to the CPL Programmers guide located on the
CognitiveTPG Web site www.CognitiveTPG.com.
CAUTION! TURNING
THE PRINTER OFF
DURING FIRMWARE
INSTALLATION COULD
DAMAGE THE PRINTER.
NOTE: IF YOUR
COMPUTER IS
CONNECTED TO
THE INTERNET, USE
THE “GET LATEST
FIRMWARE FROM
COGNITIVETPG”
BUTTON. THIS ACTION
WILL ALSO LOAD
CURRENT FONTS.
UPDATE WILL TAKE A
FEW MINUTES.