Cognitive Solutions EZLP-UG00000 Label Maker User Manual


  Open as PDF
of 30
 
30
The EZ-LP ships with the following default settings:
Parameter Default Setting
Programming Language Auto(automaticallydetectsandsetsto
EcPLorZcPL)
Speed 5ips(127mm/s)
Label Width 432(4.32inchesor110mm)
Label Length Measurelabel(automaticallymeasures
andsetslabellengthatpowerup)
Indexing Type Gap
Reference Point 0,0(upperleftcorner)
Auto Top of Form On
Enable Label Present On
Advance Label 25(0.25”or6.4mm)
Retract Label 25(0.25”or6.4mm)
DelayTime(RetractLabel) 0 seconds
Serial Port Settings
(serialportprintersonly)
9600 bps, 8 bit data, 1 stop bit, no parity
(DCEconguration-usestraight-through
cable)
Settings below only apply to printers with Ethernet
Printer IP Address 10.0.0.12
Net Mask 0.0.0.0
Gateway 0.0.0.0
DHCP On
LPD On
RTEL On
RTEL Port Number 9100
 previous