Filter
Top Products
26
Chapter 5: Advanced EZ-LP Features
Making Congurations Changes Using DOS Commands
1. Power o your current desktop label printer and disconnect the
communication cable.
2. Connect Power supply to EZ-LP and plug into wall. Do NOT turn on EZ-LP at
this time.
3. Connect preferred interface cable to EZ-LP and connect to PC.
4. Turn on the EZ-LP printer.
5. Open a text le editor such as Notepad; START > All Programs > Accessories >
Notepad.
6. Typeinthedesiredcode(seeexamplesbelow)andsavethele.Notethisle
should be saved on the root C:\ directory.
The example below shows the code to shift the printed image left by 0.50 inches.
The 50 represents the amount of shift desired in hundredths of an inch and can be
changed to another amount.
For additional setting adjustment codes, please contact technical support or reference
the CPL Programmer’s Guide at www.CognitiveTPG.com.
Click START > Run then type “cmd” and click “OK”
7. Type in one of the COPY commands below depending on the communication
interfaced used. The examples show “lename.txt” which represents the le
name of the txt le created in step 2.