Filter
Top Products
7
Chapter 2: Printer Installation
Setting up the EZ-LP Printer
Connecting the Interface and Power Cables
5. Connect the interface cable to the rear of the printer. For Serial or Parallel cables, securely
fasten the interface connector screws or clips.
POWER OFF
2. Connect power cable to AC adapter
1. Make sure power switch is OFF
4. Plug the power cable into an AC
outlet
3. Connect the AC adapter to the power
connector on the printer
USB-B
(Device)
Power OFF
IMPORTANT! PRIOR
TO CONNECTING ANY
INTERFACE CABLE
AND POWER CABLE TO
PRINTER, MAKE SURE
PRINTER IS OFF.
Serial
(DB9)
Power OFF
Ethernet
Power OFF
Parallel
(Centronics)
Ferrite Bead
(Install on Parallel Cable as Shown)
Power OFF
I O I O
PARALLELETHERNET
COM/SERUSB
NOTE: EZLP IS
CONFIGURED TO USE
STANDARD STRAIGHT
THROUGH SERIAL
CABLE WHEN USING
THE COM/SER PORT
TO CONNECT TO A DTE
DEVICE SUCH AS A
COMPUTER.