Filter
Top Products
2-2
Installation Overview
Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002
File Name: C-CH02.DOC Last Saved On: 1/27/98 4:14 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Server Warnings and Precautions
WARNING: To reduce the risk of personal injury from hot surfaces,
allow the hot plug drives and internal system components to cool before
touching.
WARNING: To reduce the risk of electric shock or damage to the
equipment:
■ Do not disable the power cord grounding plug. The grounding plug is
an important safety feature.
■ Plug the power cord into a grounded electrical outlet that is easily
accessible at all times.
■ Install the power supply before connecting the power cord to the
power supply.
■ Unplug the power cord before removing the power supply from the
server.
■ If the system has multiple power supplies, disconnect power from the
system by unplugging all power cords from the power supplies
CAUTION: Be sure that the power outlet you plug your power cord into
is easily accessible and located as close as possible to the equipment
operator. When you need to disconnect power to the equipment, be sure
to unplug the power cord from the power outlet.
CAUTION: Protect the server from power fluctuations and temporary
interruptions with a regulating uninterruptible power supply (UPS). This
device protects the hardware from damage caused by power surges and
voltage spikes and keeps the system in operation during a power failure.
CAUTION: The Compaq ProLiant Server
must always be operated with
the system unit cover on. Proper cooling will not be achieved if the
system unit cover is removed.
IMPORTANT: Because of the 100 to 120 VAC electrical rating of each power
supply, some local electrical authorities may require either one 15-Ampere circuit for
each power supply or one 20-Ampere circuit for each
pair of power supplies.