Filter
Top Products
M
Y
P
RESARIO
—G
ETTING
S
TARTED
S
ETTING
U
P
Y
OUR
C
OMPUTER
2-3
Setting Up
Your Computer
If a cable is disconnected or
you move your computer to
another location, this topic
helps you to quickly set up
again.
It’s a good idea to purchase a
surge protector to protect your
computer from electrical
spikes and power surges.
The Quick Set-Up poster that
came with your computer is a
visual guide to setting up your
computer.
If you have home networking,
refer to the home networking
documentation for instructions
on connecting your phone
lines.
Tip
See also ...
Tip
Setting Up Your Computer
Follow these steps to set up your computer:
Note: Do not set up the printer until your computer has been
set up.
1. Connect the monitor
according to the color
coding, icons, and the
instructions from the
monitor manufacturer.
2. Connect the speaker cable
and microphone cable (if
applicable).
3. Connect the power cable.
4. Connect the mouse to the
PS2 port.
5. Connect the keyboard to the
USB port at the back of the unit.
6. Connect the telephone cable
between the Modem Line In
port and the wall outlet.
7. Plug the monitor and computer power cables into the wall
outlet or surge protector.
8. Turn on the monitor, and then press the Power On button to
turn on your computer.
Note: If you are setting up your computer for the first time, follow the
on-screen instructions to register both your operating system and your
computer. The next topics discuss the registration process.