Filter
Top Products
M
Y
P
RESARIO
—G
ETTING
S
TARTED
N
EED
S
OME
H
ELP
? 6-7
Diskette drive cannot save
information to diskette.
Symptom
Diskette has been
improperly inserted.
Remove the diskette and reinsert it as follows:
Insert the edge with the sliding cover into the
drive. Push the diskette, arrow pointing toward
the computer, all the way in until the diskette
stops.
Diskette is damaged. Remove the diskette and insert a new diskette. If
a problem persists, run the Windows
Maintenance Wizard to repair the drive:
1. From the Windows taskbar, click the Start
button.
2. Point to Programs, then Accessories, then
System Tools, and then click Maintenance
Wizard.
3. Select Perform maintenance now.
4. Click OK.
Diskette is not
formatted.
To format the diskette:
1. On the Windows desktop, double-click the
My Computer icon.
2. Select the diskette (A) drive.
3. Click File, and point to Format.
4. Select the desired options, and click Start to
begin formatting the diskette.
Diskette is
write-protected.
Slide the write-protection tab to the unlocked
position on the diskette.
Diskette is full or file is
too big.
Use another diskette or compress the file to
reduce the size.
File save command
does not properly
execute.
When saving information to the diskette drive,
verify that you are using the correct drive letter.
Diskette is damaged. Replace the damaged diskette.
Problem Solution