Filter
Top Products
2–2 Compaq iPAQ Microportable Projector MP1200 User’s Guide
Using the Projector
Connecting the Projector to a Notebook
Computer
1. Connect one end of the projector signal cable into the
VGA-in connector on the side of the projector and the other
end to the DVI connector
1
A or the VGA connector
1
B on
the notebook computer and tighten the screws.
✎
Be sure the signal cable aligns with the connector. Do not force
the cable onto the connector or you may damage the signal cable
or the projector.
2. Connect one end of the power cord
2
into the side of the
projector, and the other end to an electrical outlet that is
easily accessible and close to the projector.
261799-001.book!!Page!2!!Thursday,!April!25,!2002!!3:13!PM