Filter
Top Products
Troubleshooting
Compaq iPAQ Microportable Projector MP1200 User’s Guide 8–7
Projector suddenly shuts down and
the power button LED blinks
rapidly.
An over-temperature event has been
detected. This usually occurs when
either the airflow to the unit has been
obstructed or a fan has failed. If airflow
is obstructed, remove the obstruction,
unplug the projector, re-plug the
projector, and restart. If a fan has failed
or an over-temperature event occurs a
second time, have the projector
serviced or repaired.
Remote control does not operate. 1. Ensure the remote control is within
26.25 feet (8.0 meters) when
pointed directly at the sensor or
19.69 feet (6.0 meters) when at a
30 degree angle from the sensor.
2. The battery may need to be
replaced.
3. Verify that the batteries are installed
properly.
Compatibility issues with
equipment attached to the
projector.
Contact your Compaq authorized
service provider or call Compaq
Customer Support for help. Refer to the
Worldwide Telephone Numbers
booklet
included in the projector documentation
kit for a complete list of customer
support numbers to call.
Troubleshooting
(Continued)
Problem Solutions
261799-001.book!!Page!7!!Thursday,!April!25,!2002!!3:13!PM