Filter
Top Products
Removal and replacement procedures
Maintenance and Service Guide 4–7
Remove the battery:
1. Turn the computer upside down on a flat surface, with the battery bay toward you.
2. Slide the battery release latch 1 to release the battery.
3. Pivot the battery 2 upward and remove it 3 from the computer.
Install the battery by inserting it into the battery bay until you hear a click.
Optical drive
✎
All optical drive spare part kits include an optical drive bezel and optical drive bracket.
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 4-6).
Description Spare part number
DVD±RW and CD-RW SuperMulti Double Layer Combo Drive 485038-003
DVD±RW and CD-RW SuperMulti Double Layer Combo Drive with LightScribe 485039-003
Blu-ray ROM DVD±RW SuperMulti DL Drive 484040-003