Filter
Top Products
Removal and replacement procedures
Maintenance and Service Guide 4–23
12. If it is necessary to replace the display inverter, release the display inverter 1, located at the bottom edge of the
display assembly, from its mounting clips.
13. Disconnect the display panel cable 2 and the back light cable 3 from the display inverter, and remove the
display inverter from the display enclosure. The display inverter is available using spare part number
486556-001.
14. If it is necessary to replace the display hinges, remove the two Phillips PM2.0x7.0 screws 1 that secure
each hinge to the display enclosure.
15. Remove the display hinges 2. The display hinges are available in the Display Hinge Kit, spare part
number 488384-001.