Filter
Top Products
Display assembly
Description Spare part number
17.3-inch display assembly (includes 17.3-inch 16:9 wide-aspect ratio (1600×900), white-LED
backlit, HD BrightView display panel, bezel, enclosure, hinges, camera module and cable,
microphone and cable, and 2 wireless antenna transceivers and cables)
For the Presario CQ71 Notebook PC use 513762-001
For the HP G71 Notebook PC use 513760-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 47).
5. Disconnect the wireless antenna cables from the WLAN module (see
WLAN module on page 48).
6. Remove the following components:
a. Keyboard (see
Keyboard on page 60)
b. Keyboard cover (see
Keyboard cover on page 63)
Remove the display assembly:
1. Open the computer as far as possible.
2. Disconnect the display panel cable (1) from the system board and remove the cable from the cavity
between the system board and the display left hinge.
3. Disconnect the microphone module cable (2) from the system board.
66 Chapter 4 Removal and replacement procedures