Filter
Top Products
H9A11 Cabinet Installation/Owner's Guide 2–1
2
Installation
2.1
Introduction
This chapter provides the following information:
•
Tools Required (Section 2.2)
•
Site Planning (Section 2.3)
•
Unpacking (Section 2.4)
•
Installation Procedures (Section 2.5)
2.2
Tools Required
The tools needed to install the H9A11 Cabinet are:
•
Utility knife
•
Phillips screwdriver
•
5/8-inch box wrench or adjustable wrench
2.3
Site Planning
The cabinet requires a space of 60.0 cm (23.60 in.) by 86.0 cm (33.86 in.). In addition, the
cabinet requires a clearance of 91.44 cm (36.00 in.) at both the front and rear of the cabinet
for service. This may be greater depending on the distance that a system may be slid out of
the cabinet.