Filter
Top Products
Installation
H9A11 Cabinet Installation/Owner's Guide
2–5
6.
Refer to Figure 2-2. Remove the four shipping bolts and brackets that secure the
four cabinet leveler feet to the pallet .
__________________________ Note _____________________________
The ramps attach to the front of the pallet. Therefore, the cabinet will have to be
rolled frontwards down the ramps.
____________________________________________________________
7.
Remove the ramps from the shipping carton and set the ramps in the holes
provided at the front of the pallet . Ensure that the arrows on the ramps match the
pallet arrows as shown in Figure 2-2.
_________________________Caution ___________________________
In the next step, the leveler feet must be fully retracted to prevent contact with the
ramp or the floor when the cabinet is unloaded from the pallet.
____________________________________________________________
8.
Adjust the four cabinet leveler feet and the leveler foot on the stabilizer bar to the
maximum upward position.