Filter
Top Products
3. Lift the microphone and its boot out of the computer (Figure 5-27).
NOTE: The microphone extension cable cannot be properly accessed for
service until the processor board is removed. See Section 5.11 for
details on the extension cable.
To install a microphone, reverse the above procedure.
Chapter 5.7 Status Panel
The CPU cover must be removed to gain access to the status panel. To
remove the status panel assembly, complete the following steps:
1. Prepare the computer for disassembly as described in Section 5.3.
2. Remove the CPU cover as described in Section 5.5.1.
IMPORTANT: Note the routing of the status panel cable before disturbing
the cable. It is very important that this cable be routed
properly at reassembly.
3. With the display open and tilted all the way back, disconnect the
status panel cable [1] (Figure 5-28).