Filter
Top Products
2. Place the PC Card in the tracks with the card connector to the inside
and label up.
3. Slide the card in until it seats. The door remains open while the card
device is connected.
Chapter 7.4 Expansion Base Feet
The feet for the expansion base are rectangular, adhesive-backed rubber
pads. Install the feet by removing the protective covering from the
adhesive back and placing the feet in their positions on the bottom of the
expansion base (Figure 7-8).
Chapter 7.5 Bottom Cover Assembly
The bottom cover assembly is spared as a unit and consists of:
o Bottom cover
o ISA expansion cover
o Feet