Filter
Top Products
3. Remove the latch screw as shown in Figure 5-47. The release drops out
but the spring holds the latch in place. Use forceps or needle-nose
pliers to remove the latch and spring.
Chapter 5.10 Fan
The cooling fan is mounted at the air vent on the left side of the
computer and is plugged into the system board. After removing the CPU
cover, the fan is easily removed by disconnecting the fan cable from the
system board and lifting the fan out (Figure 5-48). To remove the fan,
complete the following steps:
1. Remove the CPU cover (Section 5.5).
2. Remove the keyboard (Section 5.9.1).
3. Disconnect the fan cable from the system board (Figure 5-48).