Compaq N410C Laptop User Manual


 
Removal and Replacement Procedures
Maintenance and Service Guide 5–13
Before installing the palm rest on TouchPad models, make sure
the TouchPad 1 and RTC battery cables 2 are routed through the
respective notches in the palm rest (Figure 5-11).
Figure 5-11. Routing the RTC Battery and TouchPad Cables
5.6 Memory Expansion Board
The Compaq Evo Notebook N410c notebook has two memory
expansion slots: one is located on the bottom of the notebook and
the other is located under the palm rest. The procedure for
removing a memory expansion board from a memory expansion
socket is identical for both locations.
Follow these steps to remove a memory expansion board from the
slot in the bottom of the notebook:
1. Prepare the notebook for disassembly (Section 5.3).
2. Turn the notebook bottom side up with the front facing
forward.