Filter
Top Products
Compaq.com - Compaq Presario 1200 Series Maintenance and Service Guide - Model 1245
United States December 9, 2002
Maintenance & Service Guide
Presario 1200 Series
Model: 1245
| Home Page | Notice | Preface | Product Description | Troubleshooting
Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications
Pin Assignments | Battery Pack Operations
4. Turn the computer
over (right side up),
pull forward on the
display latches to
release and open the
display assembly.
5. Lift up front end of
the palmrest cover with
touch pad and remove
it from the groove in
the chassis.
6. Tilt the palmrest
cover with touch pad,
allowing it to rest on
top of the keyboard,
and disconnect the flex
cable from the ZIF
connector on the
palmrest cover.
CAUTION: When
replacing the
palmrest cover
with touch pad,
ensure that the
cable is fully
inserted into the
ZIF connector on
the system board.
If the metal end
comes in contact
with the
keyboard, damage
may occur to the
computer.
To replace the palmrest
cover with touch pad,
reverse the previous
procedures.
NOTE:
When replacing
the palmrest
cover, ensure
that the cable is
properly routed
through the slot
on the Upper
CPU cover.
Return to
Removal &
Replacement
Procedures
http://h18000.www1.hp.com/athome/support/msgs/1245/newp11.html [12/9/2002 9:12:20 AM]