Filter
Top Products
Compaq.com - Compaq Presario 1200 Series Maintenance and Service Guide - Model 1245
United States December 9, 2002
Maintenance & Service Guide
Presario 1200 Series
Model: 1245
| Home Page | Notice | Preface | Product Description | Troubleshooting
Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications
Pin Assignments | Battery Pack Operations
Preliminary Steps
Before running POST, complete the following preliminary steps:
1. If a power-on password has been established, type the password and press the Enter key.
If the password is not known,
clear the password.
2. Run Computer Checkup.
3. Turn off the computer and its external devices.
4. Disconnect any external devices that you do not want to test. Do not disconnect the printer
if you want to test it or use it to log error messages.
IMPORTANT:
If the problem only occurs when an external device is connected to the computer, the
problem may be related to the external device or its cable. Verify this by running POST
with and without the external device connected.
5. Install loopback plugs in the serial and parallel connectors if you would like to test these ports.
6. Ensure that the hard drive is installed in the computer.
7. Ensure that the battery pack is inserted in the computer and the computer is connected
to an external AC power source.
When these preliminary steps are completed, you are ready to run
POST.
Return to Troubleshooting index page.
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/1245/prelim.html [12/9/2002 9:17:02 AM]