Filter
Top Products
Compaq.com - Compaq Presario 1200 Series Maintenance and Service Guide - Model 1245
United States December 9, 2002
Maintenance & Service Guide
Presario 1200 Series
Model: 1245
| Home Page | Notice | Preface | Product Description | Troubleshooting
Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications
Pin Assignments | Battery Pack Operations
Removing the Battery Charger Board
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Heatspreader
Keyboard
Processor
Hard Drives
CD Drive
Battery
Charger Board
Modem
Display Panel
Assembly
Upper CPU
Cover
Speaker
Assembly
Diskette Drive
Fan Assembly
System Board
Dip Switch
Settings
Memory
Module
To remove the
battery charger
board, complete
the following
steps:
1. Prepare the
computer for
disassembly.
2. Remove the
palmrest cover
with touch pad.
3. Remove the
hard drive.
4. Remove one
screw from the
battery charger
board, unplug
the board from
the connector
on the system
board, and lift
the battery
charger board
out of the
chassis.
To replace the
battery charger
board, reverse
the previous
procedures.
NOTE:
When
replacing
the
battery
charger
board,
ensure
that the
pins are
aligned
with the
connector
on the
system
board.
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/1245/57.html [12/9/2002 9:13:28 AM]