Filter
Top Products
Compaq.com - Compaq Presario 1200 Series Maintenance and Service Guide - Model 1245
United States December 9, 2002
Maintenance & Service Guide
Presario 1200 Series
Model: 1245
| Home Page | Notice | Preface | Product Description | Troubleshooting
Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications
Pin Assignments | Battery Pack Operations
Removing the Upper CPU Cover
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Heatspreader
Keyboard
Processor
Hard Drives
CD Drive
Battery
Charger Board
Modem
Display Panel
Assembly
Upper CPU
Cover
Speaker
Assembly
Diskette Drive
Fan Assembly
System Board
Dip Switch
Settings
Memory
Module
To remove
the Upper
CPU cover
complete the
following
steps:
1. Prepare
the
computer
for
disassembly.
2. Remove
the palmrest
cover with
touch pad.
3. Remove
the
heatspreader.
4. Remove
the keyboard.
5. Remove
the hard
drive.
6. Remove
the display
panel
assembly.
7. Remove
the screw
located under
the bottom of
the unit
(rear) which
secures the
Upper CPU
cover to the
chassis and
remove four
screws
located on
the top.
8. Lift the
Upper CPU
cover off the
snaps on the
chassis. This
disconnects
the power
switch from
the connector
on the
system
board.
To replace
the Upper
CPU cover,
reverse the
previous
procedures.
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/1245/510.html [12/9/2002 9:14:06 AM]