Filter
Top Products
United States January 3, 2003
compaq.gif (932 bytes)
top_nav.gif (991 bytes)
Presario 1200 Series
Models: 1255, 1256, 1260, 1262, 1266, 1267, 1272, 1273, 1274, and 1275
Before You Begin Specifications Parts Catalog
Removal Sequence Troubleshooting Battery Operations
Product Description Pin Assignments
Index
Service Considerations
Listed below are some of the considerations that you should keep in mind during the
disassembly and re-assembly of the computer.
Tool and Software Requirements
To service the computer, you need the following:
● Compaq screwdriver kit (Spare Part No. 161946-001)
● Torx T-9 screwdriver
● 3/16-inch and 5mm nut drivers (for screwlocks and standoffs)
● Small, standard screwdriver
● Small, Phillips screwdriver
● Diagnostics software
Screws
The screws used in the computer are not interchangeable. If an incorrect screw is used during the
reassembly process it can damage the unit.
Compaq strongly recommends that each screw removed during disassembly be kept with the part
from which it was removed, then returned to the original location.
IMPORTANT:
As each subassembly is removed from the computer, it should be placed away
from the work area to prevent damage.
Return to Removal & Replacement Procedures
privacy and legal statement