Filter
Top Products
United States January 3, 2003
compaq.gif (932 bytes)
top_nav.gif (991 bytes)
Presario 1200 Series
Models: 1255, 1256, 1260, 1262, 1266, 1267, 1272, 1273, 1274, and 1275
Before You Begin Specifications Parts Catalog
Removal Sequence Troubleshooting Battery Operations
Product Description Pin Assignments
Index
4. Turn the computer
over (right side up),
pull forward on the
display latches to
release and open the
display assembly.
5. Lift up front end of
the palmrest cover with
touch pad and remove
it from the groove in
the chassis.
6. Tilt the palmrest
cover with touch pad,
allowing it to rest on
top of the keyboard,
and disconnect the flex
cable from the ZIF
connector on the
palmrest cover.
CAUTION: When
replacing the
palmrest cover
with touch pad,
ensure that the
cable is fully
inserted into the
ZIF connector on
the system board.
If the metal end
comes in contact
with the
keyboard, damage
may occur to the
computer.
To replace the palmrest
cover with touch pad,
reverse the previous
procedures.
NOTE:
When replacing
the palmrest
cover, ensure
that the cable is
properly routed
through the slot
on the Upper
CPU cover.
Return to
Removal &
Replacement
Procedures