Filter
Top Products
United States January 3, 2003
compaq.gif (932 bytes)
top_nav.gif (991 bytes)
Presario 1200 Series
Models: 1255, 1256, 1260, 1262, 1266, 1267, 1272, 1273, 1274, and 1275
Before You Begin Specifications Parts Catalog
Removal Sequence Troubleshooting Battery Operations
Product Description Pin Assignments
Index
Cables and Connectors
Most cables used throughout the units are ribbon cables; they must be handled with
extreme care to avoid damage.
Use the following precautions when handling cables to prevent damage to the cable or
computer:
● Apply only the required tension to seat or unseat the cables during insertion and removal
from the connector.
● Handle cables by the connector whenever possible.
● In all cases, avoid bending, twisting, or tearing the cables, and ensure that the cables are
routed in such a way that they cannot be caught or snagged by parts being removed or
replaced. Handle flex cables with extreme care; they can tear easily.
CAUTION: When servicing these computers, ensure that cables are placed in their
proper location during the reassembly process. Improper cable placement can cause
severe damage to the unit.
Select the desired illustration.
● Removing a Cable from a ZIF Connector.
● The ribbon cable position for the 3.2-GB, 4.0-GB, 4.3-GB, and 6.4-GB hard drive.
● The ribbon cable position for the CD drive.
● The ribbon cable position for the diskette drive.
● The cable position for the speaker assembly.
Plastic Parts
Plastic parts can be damaged if excessive force is used during disassembly and reassembly. When
handling the plastic parts, use care. Apply pressure only at the points designated in the
maintenance instructions.
Return to
Removal & Replacement Procedures
privacy and legal statement