Filter
Top Products
External Pointing
Devices
Disables the internal pointing devices when an external
pointing device is connected.
Auto
Enables BIOS support for USB mouse, keyboard, and floppy
drive during startup.
Enabled
Wake On LAN from
Power Off
Lets the notebook be turned on via the LAN port. If this
option is enabled, the notebook uses increased power while
it is shut down.
Disabled
Security Menu Description Default
User Password is Shows if a user password is set. Clear
Administrator Password
is
Shows if an administrator password is set. Clear
Set User Password Press ENTER to set, change, or clear the user password.
The password can have no more than 8 characters (0-9,
A-Z), and cannot include special or accented characters.
Enter
Set Administrator
Password
Press ENTER to set, change, or clear the administrator
password, which protects BIOS Setup settings. The
password can have no more than 8 characters (0-9, A-Z),
and cannot include special or accented characters.
Enter
Password Required to
Boot
Sets whether a user password is required when the
computer boots. Requires the administrator password for
changes.
Disabled
Boot Menu Description Default
Shows the order of boot devices. Move the entries to change
the order. Built-in LAN provides diskless boot from a network
server.
1. Hard Disk
2. Removable
Device
3. CD/DVD
4. Built-in LAN
Exit Menu Description
Save Changes and Exit Saves Setup changes, and then exits and reboots.
Discard Changes and
Exit
Discards any Setup changes made since last save, and then
exits and reboots. Does not affect password, date, or time
changes.
Get Default Values Restores default settings, and remains in Setup. Does not
affect password, date, or time changes.
Legacy USB Support
Hard Disk
Removable Device
CD/DVD
Built-in LAN
Updating the Notebook’s BIOS
Hewlett-Packard might from time to time provide updates to the notebook’s BIOS. Use e-DiagTools
for Windows to download and install these BIOS updates as needed (page 2-36).
3-28 Troubleshooting and Diagnostics Service Manual