ConnectPRO SL2116A Computer Monitor User Manual


 
Administrator (Status A)
The Administrator can:
• Set and modify all Passwords and security profiles
• Fully access any computer
• Use all OSD functions
Supervisor (Status S)
The Supervisor can:
• Fully access any computer
• Access the following OSD functions only F4 Scan, F5 Tune and F6 Moving the
Confirmation label.
User (Status U)
There are 6 different Users in the CAT5 KVM system. Each User has a Profile set by the
Administrator that defines the access level to different computers. There are 3 different access
levels, these are explained on page 17.
Activating password protection
By default OSD access is not password protected. Only the Administrator can password-protect the
OSD or disable password protection.
To do so:
1. In the General settings window navigate to the Security line.
2. Press the Space bar to toggle between Security On and Off. The password box appears.
3. Type the Administrator’s password (default is “admin”).
4. Press Enter. The new security status is set.
Changing the OSD hotkey
By pressing Shift, Shift the OSD appears. You can replace Shift, Shift with any of the following:
• Ctrl, Ctrl
• Ctrl, F11
• Print Screen
To change the hotkey:
1. Navigate to the Hotkey line.