Filter
Top Products
To view to the factory default settings:
From the File menu choose New.
45. Reminder!
All changes done with the Control software are only reflected in the OSD AFTER pressing
.
46. Password protection
When the CAT5 KVM system is password protected, the Control software behaves in exactly the
same way as the OSD. You must type in the required password to access the Control software. The
access you gain depends on the security status – exactly as with the OSD.
To change the security access, close and reopen the Control software, and type in the different
password.
Administrator (Status A)
The Administrator can:
• Set and modify all Passwords and security profiles
• Fully access any computer
• Use all functions
Supervisor (Status S)
The Supervisor can:
• Fully access any computer
• Scan computers.
User (Status U)
There are 6 different Users in the CAT5 KVM system. Each User has a Profile that defines the
access level to different computers. There are 3 different access levels. These are:
• Y – Full access to a particular computer
• V –Viewing access only, to a particular computer (No keyboard/mouse functionality)
• N – No access to a particular computer