Filter
Top Products
9131
Rev. M
3.2.1.2 High Voltage Functions Cont'd
D. Attempt to turn on the CCR. Verify it does not turn
on.
E. After repeating Step A above, re-install the dead front
cover on the CSC.
F. Restore power to all circuits.
3.2.2 Normal Operation
In most cases, the CSC will be operated from a remote location. To affect this mode,
set to remote and close the cabinet door. No other adjustments are necessary. To
operate the CSC locally, set for local operation and select the desired lighting circuit
by setting the associated local switch to ON. It is strongly recommended that the
CSC cabinet door be closed securely when the equipment is unattended to preclude
unauthorized operation.
13