Filter
Top Products
10
OPERATION (Continued)
Brightness/Contrast Adjustment
(1) Press one of the adjustment buttons when the OSD
(On Screen Display) is not shown. The OSD function
will then show the brightness and contrast settings.
(2) To adjust these settings, use the adjustment buttons
/ for brightness, and / for contrast.
Other Functions
(1) Press the menu button when the OSD is not shown.
The OSD function will then show the main menu. The
OSD has 4 submenus (Screen Menu, Recall Menu,
OSD Menu and Color Menu). You can call these up
through the main menu functions .
(2) To select the menu function, use the adjustment
buttons
/ .
(3) To execute the selected function, use the adjustment
buttons
/ as shown in Table 1-1.
Brightness/Contrast Menu
Main Menu
NOTE:
•
You can select the OSD language by using the “LANGUAGE SELECT” function
of the “OSD MENU”.
•
To return to the main menu from any sub menu, simply press the menu button.
•
To clear the OSD, press the menu button at the main menu, then choose the
“OSD EXIT” function, or wait for a few seconds, the menu window will disappear
automatically.
•
The adjusted settings will be stored automatically. The OSD might flicker on and
off for a short period while the OSD is displayed in certain screen settings.
This phenomenon is not a failure. Simply move the OSD position a little up or
down, and the OSD will become stable.