Creative 600 Webcam User Manual


 
Using PC-CAM 600 as a Digital Camera 23
a snapshot. The front red LED blinks once and the camera-ready green LED
blinks when the image is stored into memory, and turns off after the image is
saved.
Single snapshot (normal resolution)
Select this mode if you want to take single snapshots at normal resolution.
Images are captured at a resolution of 1024 x 768.
Select the flash mode that you want and then press the Snapshot button to
take a snapshot. The front red LED blinks once and the camera-ready green
LED blinks when the image is stored into memory, and turns off after the
image is saved.
Single snapshot (low resolution)
Select this mode if you want to take single snapshots at low resolution. Images
are captured at a resolution of 640 x 480.
Select the flash mode that you want and then press the Snapshot button to
take a snapshot. The front red LED blinks once and the camera-ready green
LED blinks when the image is stored into memory, and turns off after the
image is saved.
Self-timer single snapshot (high resolution)
Select this mode if you want a high resolution snapshot to be taken after a
delay of ten seconds.
You can use this feature to take pictures of yourself.
Press the Snapshot button to take a delayed snapshot. The front LED light will
blink with increasing speed and then proceed to take a snapshot in the Single
snapshot mode.
The default delay time is ten seconds.
Note: You can cancel the snapshot while the camera is counting down by
pressing the Snapshot button again.