Filter
Top Products
5
The CTCU Interface
When you run CTCU in full-screen mode, you can pull down the menu
to select one of the following sections:
❑
PnP Cards section
❑
Legacy Cards section
❑
System Devices section
❑
PCI Devices section
You can use your mouse or keyboard to move around and select an
item or action in CTCU.
Mouse Action
❑
To pull down the CTCU menu or select an item in the menu or
box using your mouse, click on the item.
Keyboard Action
❑
To pull down the CTCU menu using your keyboard, press
<ALT> followed by a key.
For example, to pull down the Menu, press <ALT, M>.
❑
To select an item in a menu or box, use the arrow keys to move
your screen cursor to that item.
Parameter Description
/S Notifies CTCU to run in silent mode. This
means that CTCU will not display any messages
or screens. It will simply update the parameters
required by the Creative drivers. If you do not
use the /S switch, CTCU will run in full-screen
mode (see Figure 1).
/W Informs CTCU to update the PnP hardware
information of your Windows drivers in the
SYSTEM.INI file. If you do not use this switch,
CTCU will prompt you to enter the name of the
directory where your Windows files can be
found.