Filter
Top Products
DIN Rail High-Voltage Switch Crestron DIN-8SW8
• If necessary, double click a device to open the “Device Settings”
window and change the Net ID, as shown in the following figure.
“DIN-8SW8 Device Settings” Window
• The ID code specified in the SIMPL Windows program must
match the Net ID of each unit. Refer to “
Identity Code” which
starts on page
10.
Program
Manager
Program Manager is the view where programmers “program” a Crestron
control system by assigning signals to symbols.
The symbol can be viewed by double clicking on the icon or dragging it
into Detail View. Each signal in the symbol is described in the SIMPL
Windows help file (
F1).
Example Program
An example program for the DIN-8SW8 is available from the Crestron
website (
www.crestron.com/exampleprograms).
18 • DIN Rail High-Voltage Switch: DIN-8SW8 Operations & Installation Guide – DOC. 6666A